1) Press and release main button " " to turn on the Meter.
2) Press and hold main button " " for five seconds until you go into the setting mode. Before
you go into setting mode, you will see power off first. Please keep pressing it until you go into
the setting mode. The year will flash.
3) Press up button " " or down button " " to change the year.
4) Press main button " " to confirm the year and move to month setting.
4
GETTING STARTED GUIDE
( For self-testing )
Display Window
Main Button ( )
Press to turn on/off
meter or go into
setting model.
Smart Code Key
Smart Code Key
Release Button
Test Strip Port
Battery Cover
Test strips vial
Control Solution
Lancing Device
Check Key
Lancet
Down Button
( )
Batteries Installation
1
1) With the Meter off, follow
①
and
②
direction
to put the new
Smart Code Key
into the track
on code key base.
2
) Push down the Smart Code Key until it snaps
into the Smart Code Key base.
2
Turn the meter over. Press and push battery
cover to open. Install both batteries at once.
Be sure to put battery in correct direction.
3
Setting Up Your Meter - Setting the Date, Time and Unit
Smart Code Key Installation
1) Hold the adjustable cap in one hand and hold the hub in the other hand. Bend the cap towards the
down side. When a gap appears between the cap and hub, pull them off in opposite directions.
2) Pull off the depth adjustable cap.
3) Insert a new disposable lancet firmly into lancet carrier.
Preparing the Lancing Device
Front View of Meter
Back View of Meter
Test strips
Sample Entry
View Window
Protective cover
5) Repeat steps 3 and 4 to change the date, time format, hour, minute and measurement unit.
After pressing the main button to confirm the measurement unit, your set-up has been finished.
Up Button
( )
B
a
t
t
e
r
y
+
-
B
a
t
t
e
r
y
+
-
Test Strips
1
2
3
Plunger
Hub
Lancet carrier
Release button
Safe switch
Depth adjustable cap
