background image

Electrocardiograph (Ver 1.0)

30

Power & Battery Specifications

Power & Battery Specifications  

31

BCM-600

When the battery is removed, all data can be reset. Only in case the product is kept for long

time, Remove the battery from the product

For the protection of the environment, please contact the agency you purchased the
product from when you wish to discard the battery.

Contact the agency you purchased battery in case battery should be changed.

To ensure the lifecycle and safety of battery, please discharge the battery and then charge
perfectly again every six months. 

Also time-worn battery exceed 24 months should be replaced.

C. Natural lifetime for spontaneous discharge of battery

The table below shows the lifetime for spontaneous discharge of the battery when the

product is unused.

D. Type of Battery

The same sort of battery should be used for replacement.

- Model : 3S2P(LS18650)

- Type : LI-Ion Battery 

E. Time for the Battery exchange

The lifetime of the battery gets shorter if it is not 100% recharged for use

9 months

6 months

3 months

0

~ 20

21

~ 30

31

~ 45

Charge / Discharge ration

Number for use

1200 times

500 times

200 times

100 % Charge / discharge

50 % Charge / discharge

30 % Charge / discharge

Power & Battery Specifications

During operation using AC power, noise may occur in the waveform. If this is the case,
ground the product soundly.

An AC power connection in a wet or damp area may cause electric shock or fatal damage
to the product. 

When you connect the adapter will charge the battery automatically

2.  Battery Specifications

When the AC power is disconnected and the switch is turned on, the power is supplied using the

battery, signaled by the orange light on the battery LED.

Both AC and DC power is used for BCM-600. Basically, AC power is used and a rechargeable

battery is available for portable use.

1.  AC Power  (110~240VAC)

If the AC power is connected to the main body of the product, a light-green color lights up on the

AC LED on the front. If the product is not being used, the power changes automatically to the

recharging mode. 

A. Signs for Battery

A. Type of Adaptor

- Model : MW160 (KA1503F02)

- Input : 100~240V(AC), 50~60Hz

- Output : 15V(DC), 3Ah 

- Manufacturer: BridgePower Corp

Battery status

Explanation

B. Time for 1 ea of battery

Recharging time : 9 H(OP Mode), 6H (Power Off Mode)

Use time :240 minutes

Battery full

After use for 50 ~ 60 minutes

Requiring recharging

Low battery requiring recharging

Storage temperature

Life for spontaneous discharge

Summary of Contents for BCM-600























Reviews: