Bionet BM7VET, Operation Manual

Page: 104 / 227

104
BM7Vet Pro User’s Manual
IBP Settings
A. IBP menu
Menu Description Available settings
A-1. Alarm IBP Alarm settings menu
A-1-1. Parameter Alarm Limit IBP-SYS, MEAN, DIA, PR parameter
alarm, level, activate setup
A-2. BP Filter Menu to set the filter to be applied
when measuring
OFF 0Hz ~ 40Hz
12Hz 0Hz ~ 12Hz: Generally
recommended for monitoring
20Hz 0Hz ~ 20Hz: It is used to
process higher frequency waveform
components, and when this filter is
used, the pressure value can rise.
OFF
12Hz
20Hz
A-3. DISPLAY OPTION IBP waveform display setting
A-3-1. SWEEP SPEED Set the speed of IBP displayed on the
screen. The basic speed of the IBP is
25 mm / s. 6.25mm/s, 12.5mm/s,
25mm/s, 50mm/s
A-3-2. IBP Label Menu to set measuring position
ART, FEM, PAP, RAP, LAP, UAP, UVP,
CVP, ICP, USERDEFINED
A-3-3. Scale Menu to set size of measurement
waveform on screen. 30, 60, 80, 100, 160,
200, 300 (in mmHg)
B-1. ZEROING Menu to set zero-point of Transducer.
If zero adjustment is not performed,
"IMBALANCE" message is displayed in
the waveform window.
Procedures (Zero reference)