Bionet BM3Vet Pro, Operation Manual

Page: 50 / 206

50
BM3Vet Pro User’s Manual
5. Alarm
Overview
The monitor displays the alarm limit (parameter threshold) and can be configured by the user to
raise an alarm if exceeded. Limits are displayed both in the alarm limits table and in the
parameter box. If this limit is exceeded, a visual or audible alarm will occur.
The bedside monitor is the primary alarm device, and there may be other secondary alarm
devices depending on how you configured the device / network. Depending on the alarm
condition, the monitor generates an alarm using one or more of the following devices:
⚫
Alarm sound according to alarm severity
⚫
Change the color in the parameter box of the alarmed parameter
⚫
Alarm messages in the local message area
⚫
Alarm banner indicating alarm status
⚫
External alarm device such as nurse call system
⚫
Activate alarm recording
The monitor generates an alarm when the parameter in the Alarm Limits table is
ON . It is not a
prerequisite that the parameter is displayed on the display or connected in the event of an alarm.
Alarm Priority
The alarm type is divided into an animal status alarm and a product status alarm.
The animal status alarm sounds when the diagnostic function (ECG 13 auto diagnosis) and alarm
upper and lower limits are exceeded, and there are levels of HIGH, MEDIUM, LOW and MESSAGE,
and there is a difference in the order and volume of the alarm.
You can set the alarm level for each parameter and function.
The animal status alarm provides the highest priority alarm.
The features of each alarm are described as follows. The alarm priority is HIGH> MEDIUM> LOW>
MESSAGE. For alarms over MEDIUM, the printer output is supported when ALARM PRINT ON is
set.