102
BM3Vet Pro
User’s Manual
How to connect a sidestream accessory:
1. The sample cell of the sampling kit must be inserted into the sample cell receptacle of the
LoFlo CO
2
Module as shown in Figure 1. A “click” will be heard when the sample cell is properly
inserted.
2. Inserting the sample cell into the receptacle automatically starts the sampling pump.
Removal of the sample cell turns the sample pump off.
3. To remove the sample cell from the sample cell receptacle, press down on the locking tab and
pull the sample cell from the receptacle.
Display
①
②
③
④
⑤
Summary of Contents for BM3Vet Pro
