Bionet BM Elite Series, Instructions For Use Manual

Page: 98 / 215

Rev. 5.01
98
In general, the leads should be placed as clean as possible with the 60Hz noise minimized to
make it possible to generate a signal. To improve the RESP signal, use a 5-lead cable set (RL as a
neutral electrode). It is recommended that the lead be placed in the maximum expansion and
contraction range of the lung, especially if deep breathing is involved.
Avoid the liver and the ventricles of the heart to prevent 60Hz noise from pulsatile blood circulation
Note
Cables and connectors to measure respiration rate (RR) are commonly used
with ECG.
Display
①
Breathe indicator: indicates the detected breath.
②
Breathing number: displays the number of respirations per minute.
③
Respiration alarm limit: indicates respiration limits.
④
Apnea limit Setting: Apnea limit sign
Respiration settings
Menu Description Available settings
A. Respiration menu
A-1. Alarm RESP alarm setting menu
A-1-1. Parameter alarm limit RR, APNEA Parameter alarm, level,