Bioloid STEM, Manual

Page: 23 / 28

北京智能佳科技有限公司
Dynamixel Management
Dynamixels used as robot actuators possess many functions. This section explains how to change
the dynamixel's settings.
Changing the ID
Here ’ s how you can change the ID.
1. Select the port the controller is connected to.
2. Click “ Connect ” .
3. A list of connected dynamixels is shown on the left. Click on the dynamixel you wish to
change the ID of.
4. Click on the ID row in the Control Table.
5. Click on the ID List combo box to see a list of possible ID's. Select the ID, then click Apply.