Chapter IV Operation Guide
This chapter explains in detail how to edit/review/modify/delete files, and how to run/stop files. It also
introduces the meaning of protection interface in the process of file running.
Warning
！
If there is any abnormal sound or display after the instrument is switched on, or there is a
fault alarm during the instrument self-testing, please switch off the power immediately
and contact Bioer.
Ready? Let's get started!
1 Upper computer operating interface
a. Operation main interface
After the system is started, enter the main interface of nucleic acid purification operation, which mainly
has the following functions: Run, New File, Ultraviolet Lamp and System Setting. The interface center displays
the operation state of the instrument. If the instrument is in operation state, click the icon of the center to further
check the detailed operation information. The followings are the idle and runtime main interfaces, respectively.
