Gene Explorer Thermal Cyeler Operation Manual Chapter Three Preparations
－
9
－
Usage of compression pad Usage of pressure balancing plate
2. Check before turning on the instrument
Before plug in and energize the instrument, please confirm the following:
1
Confirm the power supply meets the voltage required by the instrument; (see Chapter
Two for power supply requirements)
2
Confirm that the power supply plug has been reliably inserted into the power socket;
3
The power line is reliably grounded.
3 Turn on the instrument
Turn on the power switch (switch to the position of “–”), and then the instrument will carry out
self-test which will take about 20s, please wait patiently. If the self-test has discovered no
problems, the main interface will show on the screen, and you can edit, view, revise or delete
PCR amplification files.
module
hot lid
LCD screen
pressure balancing
plate hole
compression pad
power socket
power switch
Attention:
1
、
Requirements for fuse: 250V 12A
5
20. For fuse replacement,
product which is in line with the requirements should be used. Contact the
supplier or manufacturer if you need fuse.
2
、
compression pad for 96 wells PCR plate and 384 wells PCR.
3
、
pressure balancing plate for 0.2ml single tubes and 8-strip tubes
