biochrom HB Ultrospec 7500, User Manual, Page: 23 / 104

Ultrospec 7500 User Manual • 41 56 2050 REV03 • 23
GLP Settings
The GLP Settings application is accessed from the Settings screen. It can be used to define the GLP routine preferences.
There are several GLP setting options available.
1. Set the GLP frequency from the selection menu , from “Always”,
“Daily”, “Weekly”, “Monthly”, or “Quarterly” .
2. Set auto print to “On” or “Off”.
3. If auto print is set to “On”, select the print to hardware from
“Printer”,
or “USB Mass Storage” depending on what hardware is
connected to the instrument.
4. Toggle GLP warm up to “On” or “Off”, to wait for 10 minutes before
the GLP process begins.
5. Set auto save to “On” or “Off”.
6. If auto save is set to “On”, select the save to hardware from “USB
CSV”, “USB”, or “Internal” depending on what hardware is
connected to the instrument.
Confirm any changes using the confirm icon.
GLP application
The GLP application icon is visible on the home screen toolbar. It is used to view the latest GLP report, as well as print, save, view previous
GLP reports, and rerun the GLP report.
There are several actions available.
1. Open the GLP application.
2. Print the GLP report.
3. Save the GLP report.
4. Open a previous GLP report.
5. Rerun the GLP report.
GLP error
In case one of the test parameters is out of its limits, the GLP will fail and will display a red GLP Icon like bellow.
In such an unlikely case please contact Harvard Bioscience Technical
Support and share a screenshot from the GLP results screen.