biochrom HB Ultrospec 7500, User Manual

Page: 21 / 104

Ultrospec 7500 User Manual • 41 56 2050 REV03 • 21
Accessories
The Accessories application is accessed from the Settings screen. It can be used to identify which accessories are fitted to the instrument
and to define their default settings. The example below shows the 10 mm pathlength, 8 position cell changer that comes as standard with
the Ultrospec 7500.
There are several settings options available depending on the fitted
accessory (see Accessories section).
1. Toggle whether to use as single cell holder to “On” or “Off”.
2. Toggle whether to prompt per sample to “On” or “Off”, to require
a ‘take measurement’
icon press per sample or just once per loaded
changer.
3. Set the default number of sample to run to between 1 and 7.
4. Toggle whether to reference per reload to “On” or “Off”, to take a
fresh reference measurement when reloading the cell change
within the same batch of measurements or not.
Confirm any changes using the confirm icon.
User Access
The User Access application is accessed from the Settings screen. It can be used to manage user access logins, passwords, and permission
group.
There are several setting options available.
1. Delete selected user account.
2. Edit selected user account.
3. Add new user account.