15
3.Operation guidance
3.1 Boot
Turn on the power switch of the automatic nucleic acid extractor, turn on the instrument and perform
a system reset. After the reset is successful, it will enter the main menu interface.
The main interface contains 5 sub-menus such as "Run", "Program Manage", "Instrument Manage",
"UV Operator", and "About", as shown in Figure 3-1.
Figure 3-1
3.2 Program running
The program running interface contains three function buttons: "Run", "Scan code to run" and
"Select". You can view all the programs that have been entered in the list on the left.
Run
: Click to select the program to be run, and then click the "Run" button to directly run the
selected program.
Scan code to run
: Automatically enter the barcode in the identification kit through the external scan
code gun, and refer to chapter 3.3.3 for the introduction of System default program.
Select
: Click the corresponding program, and then click "Select" to see the details of the selected
program.