Biobase BK-AutoHS96, User Manual, Page: 34 / 55

33
IV. Experiment process
4.1 Experiment process
Step 2: Start up
Step 6: Consumables
Step10: Shutdown
Step 9: Test completes
Step8: Operation as per standard test
procedure
Step 7: Samples to be tested
Step 5: Test reagent
Step 4: Test protocol
Step 3: Preparation for test
Step 1: Check before instrument start up
Figure 4-1 Experimental flowchart
4.2 Check before starting
Be sure to check the instrument carefully before the experiment.
Notice
：
Make sure that the power cord and communication cable connected to the
instrument both are properly connected and provides a stable voltage.
Please make sure that there are no debris or pollution on the instrument
table, running track, etc. If there are any problems affecting the experiment,
please deal with them in time.