CI-900 Instruction Manual 8/10/2015
1554 NE 3
rd
Ave, Camas, WA 98607, USA Phone: (360) 833-8835
sales@
cid-inc
.com
www.cid-inc.com
12
Charging the Internal Battery
The CI-900 arrives with a wall charger that can be used to recharge the CI-900 battery, as well as
for continually powering the unit during long-term monitoring.
To charge the CI-900:
Connect the mini-USB cable to the front panel of the CI-900
Plug the charger into the wall
Check the charge status (on/off) at the “View>Battery” menu
Figure 9: The battery charger setup of the CI-900.
The display will flash “powering off” on the top line when you hit the power key. “Power Off” will
flash on the display as the instrument is powered off.
For fastest charging of the CI-900, use the
highest rated port on the charger and do not connect any other USB devices to the charger.
To use the CI-900 in Monitor Mode to continuously monitor fruit storage rooms or other locations,
or to run the instrument for days or weeks at a time, connect the mini-USB cable to the charger
cable and to the connection port on the front panel. Plug the charger into an electricity source.
Summary of Contents for CI-900
Page 2: ......