Manual for VMP300-based instruments
sConfiguration Manual
v
General Safety Information
Class I
This product is a Safety Class 1 instrument, which
means it has a protective earth terminal. That terminal
must be connected to earth ground through a power
source equipped with an earth ground. Before
installation or operation, check the power supply and
review this guide for safety warnings and instructions.
The equipment is not isolated (the chassis ground is
connected to the Earth safety).
Warranty and liability claims in the event of injury or material
damage are excluded when they are the result of one of the
following.
Improper use of the device,
Improper installation, operation or maintenance of the
device,
Operating the device when the safety and protective
devices are defective and/or inoperable,
Non-observance of the instructions in the manual with
regard to transport, storage or installation,
Unauthorized structural alterations to the device,
Unauthorized modifications to the system settings,
Inadequate monitoring of device components subject to
wear,
Improperly executed and unauthorized repairs,
Unauthorized opening of the device or its components,
Catastrophic events due to the effect of foreign bodies.
ONLY QUALIFIED PERSONNEL should to install this
equipment
Refer to the Hardware Installation Chapter for more
information.
WARNING
A WARNING notice denotes a hazard. It calls attention
to an operating procedure, practice, or the like that, if
not correctly performed or adhered to, could result in
personal injury or death. Do not proceed beyond a
WARNING notice until the indicated conditions are fully
understood and fixed.
CAUTION
A CAUTION notice denotes a hazard. It calls attention
to an operating procedure, practice, or the like that, if
not correctly performed or adhered to, could result in
damage to the product or loss of important data. Do not
proceed beyond a CAUTION notice until the indicated
conditions are fully understood and fixed.
Summary of Contents for HCV-3048
