Bio-Logic HCV-3048, Installation And Configuration Manual

Page: 111 / 122

Manual for VMP300-based instruments
103
Meaning of the front panel LED
S = Solid (stays on)
The colour of the letter is the colour of the
LED.
Status
n°1: Normal operation =>
Permanent or solid green LED
Status n°2: Static error => Permanent or
solid red LED
Status
n°3: with the CLIO cable
connected, the LED turns from red to
green while the firmware is loading and the
PC is finally connected to the device
thanks to the CLIO cable.
Status n°4: if the CLIO cable is disconnected no firmware loading is possible => solid red LED
Status n°5: if CLIO cable is unplugged during normal operation => solid green LED turns into
solid red LED (Status n°4)
10.2.8 MP-MEA
General
Number of channel 256
Switching time
8 ms
Maximum Current ± 500 mA
Dimension 307 * 210 * 50 mm
Electrometer
Impedance <10
10
Ohm//<3pF
Bias Current <10 pA
Bandwidth
1 MHz
EIS accuracy with ULC
10.3 PC requirements
Recommended:
- Pentium 2 GHz
Status n° Description LED
1 Status OK S
2
Static alarm (T°C/Power
supply/Open In/Emergency Stop)
S
3
Plugged CLIO: Off -> On (Firmware
loaded)
S -> S
4
Unplugged CLIO:Off -> On
(Firmware loaded)
S
5
Unplugging CLIO cable during
experiment
S -> S