Table of Contents
OPEN
CLOSE
STOP
MODE
SET
How to open Battery Compartment Cover
Push the cover out
How to replace Battery Compartment Cover
Insert latches
Insert latches into
corresponding slots
Place Battery
Compartment Cover
to engage it with Slides
Push the cover in
making settings
Key check-points prior to
When setting Upper-/Lower-Limit points,
set Upper-Limit first, then the Lower-Limit.
modification of Upper-/Lower-Limit points. In case the Roller Shade moves in the
opposite direction, refer to the Steps of Item 3-1 in Table of Contents to correct the direction.
upwards by pressing UP and downwards by pressing DOWN. After that, carry out setting or
First, make sure if the direction of movement is correct. Verify if the Roller Shade moves
Upper-Limit is activated.
makes a twitch, indicating the setting mode of
Press [SET] + [Open] keys until the Motor
back
the Motor will make a twitch
Press [Open] or [Close] key to move the Roller Shade to a
pre-determined position, to be set as the Upper-Limit.
Press for 2 seconds,
Tap to fine tune.
tune to the place where you would like
damage to the motor.Then, tap to fine
[Stop] to stop the movement to avoid
While the Shade is getting close to
CAUTION
reaching the Upper-Limit, please press
it to be set up as the Upper-Limit.
press [Stop]
and tap to fine tune
to the Upper-Limit
Press for 2 seconds,
and it will move continuously.
CAUTION
While the Shade is getting close to
reaching the Upper-Limit, please press
[Stop] to stop the movement to avoid
damage to the motor. Then, tap to fine
tune to the place where you would like
it to be set up as the Upper-Limit.
STEP-1
STEP-2
4-1 Clear off Password
1-2 Setting or modifying position of Lower-Limit
6-2 Product Specifications
6-1 Battery Replacement
5-1 Externally connected Manual Switch Box
3-1 Alter direction of Smart Roller Shades movement
2-1 Adding another Remote Control Unit
6-4 Instructions for using Remote Control Holder
6-3 Quick Setting Index
1-1 Setting or modifying position of Upper-Limit
time as a response.
twitch, the Roller Shade
will move upwards and
downwards at the same
When the Motor makes a
P.1
Instruction Manual
s
