6
Bintec User’s Guide
Quick Reference
2
Taking into Operation
X2301
and
X2302
Figure 2-2: Rear of
X2301
and
X2302
X2301w
and
X2302w
Figure 2-3: Rear of
X2301w
and
X2302w
2.2
Setting Up and Connecting
After you have carried out the following steps, the gateway is ready for
configuration with the
HTML Wizard
.
All you need for this is the cables supplied with the equipment. If you wish to set
up more than one local network connection, you need further Ethernet cables.
Set up and connect the gateway in the following order:
1.
Screw on the two provided external standard antennas to the respective
RSMA connections.
2.
Place your gateway
on a firm, level base.
3.
Orient the antenna.
4.
Serial connection: Connect the serial port of your PC (COM1 or COM2) to
the serial port of your gateway. Use only the serial cable supplied with the
Attention!
The use of the wrong mains adaptor may damage your gateway! Use only
the mains adaptor supplied with the equipment!
quick_reference.book Page 6 Thursday, April 28, 2005 3:20 PM
