Field
Description
Connection Request) sent from the LAC and SCCRPs (Start
Control Connection Reply) sent from the LNS.
• LNS: Is the same as the value for Remote Hostname of the
incoming tunnel setup message from the LAC.
Remote Hostname
Enter the host name of the LNS or LAC.
• LAC: Defines the value for Local Hostname of the LNS
(contained in the SCCRQs received from the LNS and the
SCCRPs received from the LAC). The Local Hostname con-
figured in the LAC must match the Remote Hostname con-
figured for the intended profile in the LNS and vice versa.
• LNS: Defines the Local Hostname of the LAC. If the Remote
Hostname field remains empty on the LNS, the related profile
qualifies as the standard entry and is used for all incoming
calls for which a profile with a matching Remote Hostname
can be found.
Password
Enter the password to be used for tunnel authentication. Au-
thentication between LAC and LNS takes place in both direc-
tions, i.e. the LNS checks the Local Hostname and the Pass-
word contained in the SCCRQ of the LAC and compares them
with those specified in the relevant profile. The LAC does the
same with the fields of the SCCRP of the LNS.
If this field remains empty, authentication data in the tunnel
setup messages are not sent and are ignored.
Fields in the Tunnel Profiles LAC Mode Parameters menu
Field
Description
Remote IP Address
Enter the fixed IP address of the LNS used as the destination
address for connections based on this profile.
The destination must be a device that can behave like an LNS.
UDP Source Port
Enter how the port number to be used as the source port for all
outgoing L2TP connections based on this profile is to be be de-
termined.
By default, the
Fixed
option is disabled, which means that
ports are dynamically assigned to the connections that use this
profile.
Funkwerk Enterprise Communications GmbH
11 VPN
bintec R200 Series
249
