Field
Description
channel is ever available for connections.
•
Static
: Static channel bundling.
•
Dynamic
: Dynamic channel bundling.
Fields in the Advanced Settings Dial Numbers menu
Field
Description
Entries
Enter the connection partner's numbers.
• Mode: Select whether Subscriber Number is to be used for
incoming or outgoing calls or for both. Possible values:
•
Both
(default value): For incoming and outgoing calls.
•
Incoming
: For incoming calls, where your connection
partner dials in to your device.
•
Outgoing
: For outgoing calls, where you dial your connec-
tion partner.
The calling party number of the incoming call is compared
with the number entered under Subscriber Number.
• Subscriber Number:
Enter the connection partner's number.
Fields in the Advanced Settings IP Options menu
Field
Description
OSPF Mode
Select whether and how routes are propagated via the interface
and/or OSPF protocol packets are sent.
Possible values:
•
Passive
(default value) OSPF is not activated for this inter-
face, i.e. no routes are propagated or OSPF protocol packets
sent over this interface. Networks reachable over this inter-
face are, however, included when calculating the routing in-
formation and propagated over active interfaces.
•
Active
: OSPF is activated for this interface, i.e. routes are
propagated or OSPF protocol packets sent over this interface.
•
Down
: OSPF is disabled for this interface.
Proxy ARP Mode
Select whether and how ARP requests from your own LAN are
Funkwerk Enterprise Communications GmbH
10 WAN
bintec R200 Series
205
