Field
Description
Connection Idle Timeout Only if Always on is disabled.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are
0
to
3600
(seconds).
0
deactivates the
short hold.
The default value is
300
.
Example:
10
for FTP transmission,
20
for LAN-to-LAN transmis-
sion,
90
for Internet connections.
Fields in the PPPoEIP Mode and Routes menu
Field
Description
IP Address Mode
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
Get IP Address
(default value): Your device is dynamic-
ally assigned an IP address.
•
Static
: You enter a static IP address.
Default Route
Select whether the route to this connection partner is to be
defined as the default route.
The function is activated with
Enabled
.
The function is enabled by default.
Create NAT Policy
Specify whether Network Address Translation (NAT) is to be ac-
tivated.
The function is activated with
Enabled
.
The function is enabled by default.
Local IP Address
Only if Address Mode =
Static
Enter the static IP address of the connection partner.
Funkwerk Enterprise Communications GmbH
10 WAN
bintec R200 Series
187
