16.1.2.3 Enable automatic direct dialling
Select the entry with the Navigator.
When you select
%
, the current direct call is overwritten.
Confirm your selection with the OK key.
Select
%
with the Navigator.
When you select
, the current direct call is deleted.
Confirm your selection with the OK key. The entry is retained, but is no longer enabled.
When you press the OK key again, you will be back in the PBX menu. Otherwise, the dis-
play will end after about 30 seconds, and the system telephone goes back to the system
telephone menu.
16.1.2.4 Delete a direct call
Select the entry with the Navigator.
When you select
%
, the current direct call is overwritten.
Confirm your selection with the OK key.
Select
with the Navigator.
Confirm your selection with the OK key.
The entry is deleted.
When you press the OK key again, you will be back in the PBX menu. Otherwise, the dis-
play will end after about 30 seconds, and the system telephone goes back to the system
telephone menu.
16.1.3 Follow-me
This feature enables you to set up call forwarding from an external subscriber. To set up the call forwarding, dial the
service number and PIN (a 6-digit number) from the external telephone. The PBX checks the authorisation to set up
call forwarding externally using the PIN. If the remote access is authorised, you hear your PBX's special dialling tone.
You then dial the code and number of the internal subscriber whose calls are to be forwarded. Then dial the number
of the subscriber to whom the calls should be transferred. The subscriber may be an internal subscriber in the PBX,
or an external subscriber.
Select
*%
with the Navigator.
Confirm your selection with the OK key.
Enter the number you want.
Confirm your selection with the OK key.
bintec elmeg GmbH
16 The elmeg hybird's PBX menu.
System telephones elmeg S560 / elmeg S530
81
