15.17.4.2 End the conference
You are conducting a conference call.
You wish to end the conference.
Press the
softkey.
Select
,
.
Confirm your selection with the OK key.
You are reconnected with the second subscriber. "Subscriber 1" is put on hold.
You are back in the hold for enquiry.
If you now press the R key, the connection with the second subscriber is ended and you
are connected to "subscriber 1".
15.17.5 Transfer
Note
This feature is only possible with a party who is on hold.
15.17.5.1 Transfer a call to an engaged subscriber
You want to transfer the current call to another extension and you see that the extension
is engaged.
Use the
softkey to go to the next menu.
You can transfer the current call to the engaged extension and you will then be reconnec-
ted directly with "subscriber 1".
If you press the hold for enquiry key again, the call is aborted and you are reconnected
directly with "subscriber 1".
When the extension called ends their conversation and replaces the receiver, the trans-
ferred call will be signalled.
If the time defined in the elmeg hybird expires with no query to the transferred call, there
is a "return call" for "subscriber 1".
15.17.5.2 Transfer
Note
When transferring a call, "subscriber 1" and the subscriber in the last held connection are always con-
nected.
You are in a call.
Another call is signalled.
bintec elmeg GmbH
15 Dialling
System telephones elmeg S560 / elmeg S530
77
