Chapter 14 Temporary settings
While you are being called or are phoning out, you can adjust the volume of the receiver or the loudspeaker as you
require. This setting can be temporary for the current call or conversation. This setting cannot be saved.
14.1 Sound volume settings
After each key press, the temporary settings appear in the display for approx. 3 seconds. You then see the previous
display once more.
14.1.1 Set the receiver volume
You can adjust the receiver volume during a call.
Press the +/- keys to set the desired volume. You can monitor the setting in the display
using the entry bar. The value set is shown as a number, on the right next to the entry
bar.
The settings range from 1 - 3.
Use the
softkey to display the next menu.
14.1.2 Set the headset volume
You can adjust the headset volume during a call.
Press the +/- keys to set the desired volume. You can monitor the setting in the display
using the entry bar. The value set is shown as a number, on the right next to the entry
bar.
The settings range from 1 - 10.
Use the
softkey to display the next menu.
14.1.3 Set the loudspeaker volume
You can adjust the loudspeaker volume during a call.
Press the +/- keys to set the desired volume. You can monitor the setting in the display
using the entry bar. The value set is shown as a number, on the right next to the entry
bar.
The settings range from 1 - 10.
Use the
softkey to display the next menu.
Note
When you are using the receiver, headset or hands free to conduct a call and the loudspeaker is
switched on, only the loudspeaker volume is adjusted.
bintec elmeg GmbH
14 Temporary settings
System telephones elmeg S560 / elmeg S530
57
