The OK key is used to save the function, and you go back to the
menu.
12.4.6.5 Language
With this setting, only the language of the text in the system telephone is changed. Functions that have been set up
in the elmeg hybird, e. g. the functions found under
continue to appear in the language of the elmeg hy-
bird.
Previous steps: Menu -> Settings -> Display-> Language
Use the Navigator to select the language in which you wish to use the system telephone.
The tick at the end of the row indicates that this language is enabled.
The OK key is used to save the language, and you go back to the
menu.
Note
Other languages, if available, may be loaded from the elmeg hybird. The number of languages avail-
able in the system telephone is limited.
12.4.7 Quick-Dial (dial preparation with automatic assignment)
If the telephone is idle and any digit is dialled, the hands free switches on. Based on the setting "Automatic assign-
ment" or "Manual assignment", the assignment is done internally or externally.
Previous steps: Menu -> Settings
Select
2
with the Navigator.
Use the "Right" Navigator to display the next menu for the selected row.
Select
or
with the Navigator.
The tick at the end of the row indicates which setting is enabled.
The OK key is used to save the setting, and you go back to the
menu.
12.4.8 Acknowledge tone
You can set on your system telephone whether the acknowledge tones are switched on permanently, never or in the
event of an incorrect entry. The acknowledge tones are always switched on in the basic settings.
Previous steps: Menu -> Settings
Select
#%
with the Navigator.
Use the "Right" Navigator to display the next menu for the selected row.
Use the Navigator to select the row you wish to edit.
: The acknowledge tone is always switched on.
: The acknowledge tone is switched off.
,
: The acknowledge tone is only switched on for incorrect entries.
The tick at the end of the row indicates which setting is enabled.
12 Menu
bintec elmeg GmbH
48
System telephones elmeg S560 / elmeg S530
