entry bar.
The settings range from 1 - 10.
The OK key is used to save the brightness setting, and you go back to the
menu.
12.4.6.3 Display illumination
Previous steps: Menu -> Settings -> Display-> Display illumination
Use the Navigator to select the function you wish to edit.
#%
. The display illumination is switched off.
#%
. The display illumination is always switched on.
. The display illumination is switched on for a particular time that is to be specified,
e. g. after the receiver is lifted.
The tick at the end of the row indicates that this feature is enabled.
The OK key is used to save the setting, and you go back to the
menu.
Use the "Right" Navigator to display the next menu for the selected row.
Delay
You want the display to stay lit up for a while e. g. after a call is over. You can specify the delay in 15 second incre-
ments from 15 to 120 seconds. This time restarts every time there is a new action (key press) within the delay time.
Previous steps: Menu -> Settings -> Display-> Display illumination->Verzögerung
Press the +/- keys to specify the delay you want. The value set is displayed to the right in
the row.
The OK key is used to save the delay, and you go back to the
menu.
Note
The delay begins when the system telephone is idle (e. g. when the receiver is hung up again after a
call).
12.4.6.4 Status LED
Here you can specify the function of the status LED. One or more functions may be enabled here.
Previous steps: Menu -> Settings -> Display-> Status LED
Use the Navigator to select the LED function you wish to view.
.%
: The LED flashes.
.%
: The LED flashes.
: The LED lights up.
The tick at the end of the row indicates which function is enabled.
bintec elmeg GmbH
12 Menu
System telephones elmeg S560 / elmeg S530
47
