12.4.5.2 Use automatically
Note
As described in
on page 49, auto answer can be set up.
Previous steps: Menu -> Settings ->Auto answer
If you have connected a headset to your system telephone, you can select auto answer
to automatically use the headset for certain types of use.
: The connection via the headset is not automatically accepted, only after the headset
has been switched on.
: The connection via the headset is accepted immediately.
: The connection via the headset is accepted after the time specified.
12.4.6 Display
Previous steps: Menu -> Settings
Select
with the Navigator.
Use the "Right" Navigator to display the next menu for the selected row.
Use the Navigator to select the function you wish to edit.
1,
1
Use the "Right" Navigator to display the next menu for the selected row.
12.4.6.1 Display contrast
Previous steps: Menu -> Settings -> Display-> Display contrast
Press the +/- keys to specify the contrast you want. You can monitor the setting in the dis-
play using the entry bar. The value set is shown as a number, on the right next to the
entry bar.
The settings range from 1 - 10.
The OK key is used to save the contrast setting, and you go back to the
menu.
12.4.6.2 Display brightness
Previous steps: Menu -> Settings -> Display-> Display brightness
Press the +/- keys to specify the brightness you want. You can monitor the setting in the
display using the entry bar. The value set is shown as a number, on the right next to the
12 Menu
bintec elmeg GmbH
46
System telephones elmeg S560 / elmeg S530
