BinTec elmeg S530 Manual Download Page 25

Page: 25 / 96

8.3.1 Loudspeaker / hands free

Status

Key

Action

Idle (receiver / headset at rest)

Switch on the hands free

Start dialling, if the numbers have been entered.

Call status via the receiver / headset.

Switch the loudspeaker on and off.

Press the key briefly

Dialling status.

Call status.

Hands free switched on.

End dialling.

End connection.

Switch hands free off.

Search in the phone book or the caller list.

Start dialling the selected number or subscriber.

Keep key pressed down

Call status via the receiver

Loudspeaker is switched on or off.

Switch to hands free, if the key is kept pressed
down when the receiver is hung up.

Call status via the headset

Loudspeaker is switched on or off.

Switch to hands free.

8.3.2 Plus or minus keys

Status

Key

Action

Call status via receiver.

Temporarily increase the receiver volume.

Call status via receiver.

Temporarily reduce the receiver volume.

Call status via headset.

Temporarily increase the headset volume.

Call status via headset.

Temporarily reduce the headset volume.

Call status loudspeaker / hands free.

Temporarily increase the loudspeaker volume.

Call status loudspeaker / hands free.

Temporarily reduce the loudspeaker volume.

8.3.3 Redial Last Number key

Status

Key

Action

Receiver / headset at rest.

Open the Redial Last Number list:

bintec elmeg GmbH

8 System telephone display and keys

System telephones elmeg S560 / elmeg S530

Summary of Contents for elmeg S530

































































































Search results

Summary of Contents for elmeg S530

Reviews:

Related manuals for elmeg S530

Brands by name

Popular brands

BinTec elmeg S530, Manual

Search results

Summary of Contents for elmeg S530

Reviews:

Related manuals for elmeg S530

Brands by name

Popular brands