elmeg IP130 / en / elmegIP130_v1_April-2014 / settings.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
76
elmeg IP130
bintec elmeg
Configuring basic settings
Setting the backlight
The brightness of the backlight for the display can be set to one of seven levels or you can spec-
ify a time period during which the backlight is deactivated completely, e.g., at night.
If the display backlight is deactivated, it can be reactivated by pressing any key or by an incom-
ing call. In this situation, pressing the key has no further function.
Prerequisite:
The date and time have already been set.
‰
¢
Settings
¢
Display
¢
Backlight
Brightness
r
Select the required brightness level from
1
to
7
. Your setting is activated immedi-
ately so that you can check it and correct
it if necessary.
Time Control
r
Select
On
or
Off
.
The following fields only appear when
Time
Control
=
On
.
Display off from
~
Enter the time at which the display
backlight should be deactivated, in
four-digit format.
Display off until
~
Enter the time at which the display
backlight should be reactivated, in
four-digit format.
§§Save§§
Press the display key to save your
settings.
Backlight
Back
Save
Brightness
U
T
Time Control:
5
On
Display off from:
V
Backlight
Back
Save
Time Control:
5
On
Display off from:
W
00:00
Display off until:
00:00
