bintec elmeg be.IP 4isdn Manual Download Page 390

Page: 390 / 488

Field

Menu

Value

Schedule Interval

Local Services -> Scheduling ->
Options

sec

17.8 Surveillance

In this menu, you can configure an automatic availability check for hosts or interfaces and
automatic ping tests.

You can monitor temperature with devices from the bintec WI series.

Note

This function cannot be configured on your device for connections that are authentic-
ated via a RADIUS server.

17.8.1 Hosts

A list of all monitored hosts is displayed in the Local Services->Surveillance->Hosts
menu.

17.8.1.1 Edit or New

Choose the

icon to edit existing entries. Choose the New button to create additional

monitoring tasks.

The menu Local Services->Surveillance->Hosts->New consists of the following fields:

Fields in the Host Parameters menu

Field

Description

Group ID

If the availability of a group of hosts or the default gateway is to
be monitored by your device, select an ID for the group or the
default gateway.

The group IDs are automatically created from

. If an

entry has not yet been created, a new group is created using
the

92 -

option. If entries have been created, you can se-

lect one from the list of created groups.

Each host to be monitored must be assigned to a group.

17 Local Services

bintec elmeg GmbH

376

be.IP 4isdn

Summary of Contents for be.IP 4isdn









































































































































































































































































































































































































































































































Search results

Summary of Contents for be.IP 4isdn

Reviews:

Related manuals for be.IP 4isdn

Brands by name

Popular brands

bintec elmeg be.IP 4isdn, Manual

Search results

Summary of Contents for be.IP 4isdn

Reviews:

Related manuals for be.IP 4isdn

Brands by name

Popular brands