17.7.1.1 New
Choose the New button to create additional event lists.
The menu Local Services->Scheduling->Trigger->New consists of the following fields:
Fields in the Basic Parameters menu
Field
Description
Event List
You can create a new event list with
92
(default value). You
give this list a name with Description. You use the remaining
parameters to create the first event in the list.
If you want to add to an existing event list, select the event list
you want and add at least one more event to it.
You can use event lists to create complex conditions for initiat-
ing an action. The events are processed in the same order in
which they are created in the list.
4Description
Only for Event List
92
Enter your chosen designation for the Event List.
Event Type
Select the type of initiator.
Possible values:
•
)
(default value): The operations configured and assigned
in Actions are initiated at specific points in time.
•
.&59.
: The operations configured and assigned in Ac-
tions are initiated when the defined MIB variables assumes
the assigned values.
•
1* 3
: Operations configured and assigned in
Actions are initiated, when the defined interfaces take on a
specified status.
•
1* )11*
: Operations configured and assigned
in Actions are initiated when the data traffic on the specified
interfaces falls below or exceeds the defined value.
•
)
: Operations configured and assigned in Actions
are initiated when the specified IP address is / is not access-
ible.
•
%1* $1
: Operations configured and as-
17 Local Services
bintec elmeg GmbH
356
be.IP 4isdn
