(2)
Click on LAN Connection.
(3)
Click on Properties in the status window.
(4)
Look for the Internet Protocol (TCP/IP) entry in the list of network components.
Installing the TCP/IP protocol
If you cannot find the Internet Protocol (TCP/IP) entry, install the TCP/IP protocol as fol-
lows:
(1)
First click Properties, then Install in the status window of the LAN Connection.
(2)
Select the Protocol entry.
(3)
Click Add.
(4)
Select Internet Protocol (TCP/IP) and click on OK.
(5)
Follow the on-screen instructions and restart your PC when you have finished.
Configuring a Windows PC as a DHCP client
Assign an IP address to your PC as follows:
(1)
Initially, proceed as described to display the network properties.
(2)
Select Internet Protocol (TCP/IP) and click on Properties.
(3)
Choose Determine IP address automatically.
(4)
Also choose Determine DNS server address automatically .
(5)
Close all the windows by selecting OK.
Your PC should now meet all the prerequisites for configuring your device.
Note
You can now launch the configuration interface for doing the configuration by entering
the preconfigured IP address of your device (192.168.0.251) in a supported browser
(Internet Explorer 6 or later, Mozilla Firefox 1.2 or later) and entering the pre-set login
data (User:
, Password:
).
4.2 Configuring the system
bintec elmeg GmbH
4 Basic configuration
be.IP 4isdn
19
