Operation Manual:
MODEL BBR PRESSURE/SIPHON FEED
HAND GUN
Important:
Read and follow all instructions and SAFETY PRECAUTIONS
before using this equipment
This is a production hand spray gun suitable for use with solvent and water based coating materials. The performance of this gun is
achieved by a range of air nozzles combined with large, smooth flowing air passages and an oversize air valve which gives a lower
pressure drop. The gun is designed to be used with a siphon cup or material feed hose. Fluid passages are all stainless steel as an
option.
IMPORTANT:
These guns are not designed for use with highly corrosive or highly abrasive coating material and if used with such
materials it must be expected that the need for thorough cleaning and/or the necessity for replacement parts will be increased. If there
is any doubt regarding the suitability of a specific material, advise what material is to be used and/or submit a sample for test.
DESCRIPTION
SB-E-A1-21-1
©ITW BINKS 1999
Body:
Aluminium alloy polished and anodised.
Air Nozzle:
Brass Nickel Plated with taper location on material nozzle to ensure concentricity.
Material Nozzle:
Stainless steel, located in body and in air nozzle by tapers.
Needle Valve:
Stainless Steel / Delrin adjustable .
Trigger:
Pressed steel for durability & polished
Air Valve:
PTFE
Springs:
All springs are stainless steel.
Connections:
Air inlet connection is 1/4” BSP and fluid connection is 3/8” BSP (NPS available)(All 60
o
Cone).
Finish:
Gun body red anodised. All brass parts are nickel plated.
Weight:
0.57 kg (1Ib. 4 oz).
Dimensions:
Less Cup (17. 5 X 3.65 X19 cm) (7 long X 1
1
/
2
wide x 7
1
/
2
” high).
Max Working Pressure:
Air & Fluid 10 bar (145 psi)
Max Fluid Temp:
50
0
C (122
0
F)
SPECIFICATIONS
GROUP A
Normal range of finishing materials from thin spirits to heavy enamels.
Figure in ( ) brackets is air consumption in c.f.m at 4.8 bar (70 psi).
Figure in [ ] brackets is air consumption in m
3
/ hr at 4.8 bar (70 psi).
SPRAYGUN
MATERIAL NOZZLE
NEEDLE
AIR NOZZLE
PART N
o
THREAD PART NO CODE BORE PART NO MAT
L
PART NO CODE AIR CONS
N
GRP
102506
BSP
200500
A047
0.046”,1.15mm 188318
ST ST/DELRIN 200607 AP21
(23.0) [38.6]
A
102507
BSP
200500
A047
0.046”,1.15mm 188318
ST ST/DELRIN 200604
AP19
(21.0) [35.3]
A
102516
BSP
200501
A061
0.059”,1.5mm 188318
ST ST/DELRIN 200604
AP19
(21.0) [35.3]
A
102517
BSP
200501
A061
0.059”,1.5mm 188318
ST ST/DELRIN 200613
AS20
(21.0) [35.3]
A
102520
BSP
200502
A072
0.073”,1.85mm 188318
ST ST/DELRIN 200601
AS17
(17) [28.6]
A
102526
BSP
200502
A072
0.073”,1.85mm 188318
ST ST/DELRIN 200613
AS20
(21) [35.3]
A
102853
NPS
200501
A061
0.059”,1.5mm 188318
ST ST/DELRIN
NO AIR CAP
A
Chart 1
Ordering Information :
