TWG 01 01/2011
page 25/39
6.4.7 Length of playback time
You can select the length of playback of the entered voice messages. The selected message
combination will be repeated as many times as needed to cover the selected playback duration. Factory
setting: 50 sec.
Example. Length of voice message: 10 sec: With a playback time of 50 sec the message will thus be
repeated 5 times.
Options of playback time:
50
sec
70 sec
90
sec
110
sec
Step Key
Effect
Yellow
LED
1.
Program call
1x flashing
2.
Program selection:
”Setting the playback time“
1x flashing
3.
Selection of program step confirmed
2x flashing
4.
e.g.
Selection of playback time
1x flashing
5.
Programming terminated
lights up for 1.5 sec
6.4.8 Test call
You can perform a test call to one of the stored phone numbers. The receiver should be informed about
the call and accept it so that the TWG 01 can correctly terminate the call.
During the test call the selected phone number is dialed only once, independently of the generally set
number of call repeats (chap. 6.4.6).
Step Key
Effect
Yellow
LED
1.
Program call
1x flashing
2.
Program selection:
“Test call“
1x flashing
3.
e.g.
Selection of the storage location (1 up
to 6) of the phone number to be dialed
1x flashing
4.
e.g.
Selection (0, 1, 2, or 3) of a message
with 3 zone operation
1x flashing
5.
Programming terminated. TWG 01
performs the test call.
lights up for 1.5 sec