Binder MK 115 Operating Manual Download

Page: 69 / 159

MK / MKT (E5) 03/2019

page 69/158

11.3 Resetting an alarm, list of active alarms

Normal display in state of alarm (example).

Press the

Alarm

icon

List of active alarms.

Press the

Reset alarm

icon.

Pressing the

Reset alarm

icon mutes the buzzer for all active alarms. The icon then disappears.

•

Acknowledging while the alarm condition persists: Only the buzzer turns off. The visual alarm indication

remains on the controller display. The alarm remains in the list of active alarms.

When the alarm condition has ended, the visual alarm indication is automatically cleared. The alarm is
then no longer in the list of active alarms.

•

Acknowledging after the alarm condition has ended: The buzzer and the visual alarm indication are

reset together. The alarm is then no longer in the list of active alarms.

11.4 Activating / deactivating the audible alarm (alarm buzzer)

Path:

Main menu > Settings > Chamber

“Chamber” submenu (example).

In the field “Audible alarm” select the desired setting
“off“ or “on” and press the

Confirm

icon.

Summary of Contents for MK 115
































































































































































Search results

Summary of Contents for MK 115

Reviews:

Related manuals for MK 115

Brands by name

Popular brands

Binder MK 115, Operating Manual

Search results

Summary of Contents for MK 115

Reviews:

Related manuals for MK 115

Brands by name

Popular brands