Binder KBF 115, Operating Manual

Page: 112 / 155

KBF + KMF (E6) 07/2017 page 112/155
19. Options
19.1 Communication software APT-COM™ 3 DataControlSystem (option)
The chamber is regularly equipped with an Ethernet interface (4) that can connect the BINDER commu-
nication software APT-COM™ 3 DataControlSystem. The actual temperature and humidity values are
given at adjustable intervals. Programming can be performed graphically via PC. Up to 30 chambers with
RS 422 interface can be cross-linked. The MAC Address is indicated in the “Device info” controller menu
(chap. 14.5.2.2). For further information on networking please refer to the operating manual of the
BINDER communication software APT-COM™ 3.
19.2 RS485 interface (option)
With this option, the chamber is equipped with an additional 2-wire RS485 serial interface (7) that can
connect the BINDER communication software APT-COM™ 3 DataControlSystem. The actual tempera-
ture and humidity values are given at adjustable intervals. For further information, please refer to the op-
erating manual of the BINDER communication software APT-COM™ 3.
19.3 Data logger kits (option)
BINDER Data Logger Kits offer an independent long-term measuring system for temperature and humidi-
ty, available for different temperature ranges. According to the selected kit, the Data Logger can measure
and record also the ambient temperature and humidity values via a second multi-function sensor.
BINDER Data Loggers are equipped with a keyboard and a large LCD display, alarm functions and a
real-time function. Measurement data are recorded in the Data Logger and can be read out after the
measurement via the RS232 interface of the Data Logger. It offers a programmable measuring interval
and permits storing up to 64000 measuring values. Reading out is done with the Data Logger evaluation
software. You can give out a combined alarm and status protocol directly to a serial printer.
KBF: Data Logger Kit TH 70: Multi-function sensor for chamber temperature and humidity: Temperature
range -40 °C / -40 °F up to 70 °C / 158 °F , humidity range 0% r.H. up to 100% r.H.
KBF: Data Logger Kit TH 70/70: Multi-function sensor for chamber temperature and humidity: Tempera-
ture range -40 °C / -40 °F up to 70 °C / 158 °F, humidity range 0% r.H. up to 100% r.H. Multi-function
sensor for ambient temperature and humidity: Temperature range -40 °C / -40 °F up to 70 °C / 158 °F,
humidity range 0% r.H. up to 100% r.H.
KMF: Data Logger Kit TH 100: Multi-function sensor for chamber temperature and humidity: Tempera-
ture range -40 °C / -40 °F up to +100 °C / 212 °F , humidity range 0% r.H. up to 100% r.H.
KMF: Data Logger Kit TH 100/70: Multi-function sensor for chamber temperature and humidity: Tem-
perature range -40 °C / -40 °F up to +100 °C / 212 °F, humidity range 0% r.H. up to 100% r.H. Multi-
function sensor for ambient temperature and humidity: Temperature range -40 °C / -40 °F up to 70 °C /
158 °F, humidity range 0% r.H. up to 100% r.H.
For detailed information on installation and operation of the BINDER Data Logger, please
refer to the mounting instructions Art. No. 7001-0204 and to the original user manual of the
manufacturer, supplied with the data logger.