Binder KBF 115 (E5.2), Operating Manual

Page: 50 / 103

KBF / KBF P (E5.2) 02/2012 page 50/103
9.5 Program entry as “set-point ramp” or as “set-point step”
In order to avoid incorrect programming, we recommend plotting both the temperature and humidity pro-
files (chart templates in chap. 9.11 and 9.12) and entering the values into a table (templates in chap 9.13
and 9.14).
The controller provides 8 operation lines (non-functional with standard unit) that can be activated or de-
activated for each program section.
Program entry as “set-point ramp” (example of a temperature program)
W/°C
t/min.
01 02 03 04
0
20
40
60
80
100
30 120 180 380
05
Tolerance
maximum
Tolerance
maximum
Program table corresponding to the diagram above:
Program
section
Set-point
temp.
Fan Section
time
Operation
lines
Target
section
No. of
cycles
Min.
tolerance
Max.
tolerance
01 40 100 % 00:30:00 Off 1 0 -1999 +9999
02 60 100 % 01:30:00 Off 1 0 -5 +5
03 90 100 % 01:00:00 Off 1 0 -2 +2
04 90 100 % 03:20:00 Off 1 0 -1999 +9999
05 20 100 % 00:00:01 Off 1 0 -1999 +9999
Now enter the values of the above program table into one of the 25 program places of the controller MB1:
08:43:55 15.12.09