CB (E7) 06/2018
Page 111/174
14.5 Network and communication
For these settings at least the “Admin” authorization level is required.
14.5.1 Serial RS485 interface (available via BINDER INDIVIDUAL Customized Solutions)
This menu allows to configure the communication parameters of the RS485 interface.
The device address is required to recognize chambers with this interface type in a network, e.g. when
connecting it to the optional communication software BINDER APT-COM™ 3 DataControlSystem (chap.
18.1). In this case do not change the other parameters.
Path:
Main menu > Settings > Serial interfaces
“Serial interfaces” submenu.
•
Select the desired setting in the field “Baud rate”.
•
Select the desired setting in the field “Data format”.
•
Select the field “Minimum response time” and enter the desired minimum response time. Confirm entry
with
Confirm
icon.
•
Select the field “Device address” and enter the device adress. Factory setting is “1”. Confirm entry with
Confirm
icon.
After completing the settings, press the
Confirm
icon to take over the entries and exit the menu,
or
press
the
Close
icon to exit the menu without taking over the entries.
Summary of Contents for CB 170
Page 165: ...CB E7 06 2018 Page 165 174 25 9 Dimensions CB 170 Dimensions in mm...
Page 167: ...CB E7 06 2018 Page 167 174...
Page 168: ...CB E7 06 2018 Page 168 174 27 Product registration...
Page 175: ......
