Binder APT.line C 150, Operating Manual

Page: 31 / 79

C 150 (E2) 06/2011 page 31/78
7.3 Operating mode USER: Advanced settings
•
In Normal display, press “MODE” and “EXIT” simultaneously for 3 seconds to access the options for
selecting the C 150's operating modes.
Figure 21: Selecting the operating mode
•
Press “ ▲ ”until the value “
OP.U
” (operating mode USER) appears in the upper display.
•
Press “MODE”. The display to enter the password appears.
The operating mode USER is password-protected by a number. The password is preset to "1" in factory.
You can change the password in operating function “
PA.U
”.
Figure 22: Password request
•
Use “ ▲ ” or “ ▼ ” to enter the password and press “MODE”.
•
Use “MODE” to successively call up the operating functions.
•
Use “ ▲ ” or “ ▼ ”to set the values of the operating functions.