Binder 9020-0402, Translation Of The Original Operating Manual

Page: 10 / 173

MK LIT (E5) 01/2021 page 10/172
1.5 Localization / position of safety labels on the chamber
The following labels are located on the chamber:
Pictograms (Warning signs)
Hot surface (on chamber door)
Cold surface (on chamber door)
Electrical hazard
(chamber with voltage and frequency
changer: on the voltage and fre-
quency changer)
Service label
Figure 1: Position of labels on the chamber
Keep safety labels complete and legible.
Replace safety labels that are no longer legible. Contact BINDER service for these replacements.
1.6 Type plate
The type plate sticks to the left side of the chamber, bottom right-hand, above the refrigerating module.
Figure 2: Type plate (example of LIT MK 240 regular chamber)
Nominal temp. 110 °C 5,60 kW / 12,0 A Max. operating pressure 29 bar
230 °F 400 V / 50 Hz Stage 1: R 452 A – 1,40 kg
IP protection 20
Safety device DIN 12880 3 N ~ C ontains fluorinated greenhouse gases
Class 2.0 covered by the Kyoto Protocol
Art. No. 9020-0402
Project No.
Built 2021 Battery test chamber
BINDER GmbH
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
www.binder-world.com
LIT MK 240
E5
Serial No. 00000000000000
Made in Germany