Repair work at the housing
5.5
Replacing the castors
Spare parts:
2 x castors 16x50 (order no. 6006-0028)
2 x castors 16x50 with lock (order no. 6006-0029)
Necessary
tools:
Fork lifter or elevating truck
Drift punch 6-8 mm /
0.24 x 0.31 in
Rubber mallet
If appropriate, crosstip screwdriver, size 2
CAUTION!
Sliding or tilting of the unit.
Danger of mechanical damages.
Only use a fork lifter or lifting truck with sufficient carrying force to lift the unit.
Do NOT lift the unit laterally.
Do NOT continue lifting the unit if it inclines to the side.
Correct the balance, if necessary, by differently positioning the fork lifter or lifting
truck.
All lateral supports at the bottom of the unit must be completely supported on the
fork.
Make sure that the unit is placed stable during the service work to be performed
and will not tilt or slip.
Secure the unit if necessary against falling.
CAUTION!
Danger of mechanical damages.
Do NOT lift or transport the unit using the door handle or the door
When lifting the unit, mind not to squeeze the electrical wiring.
Service Manual KBF (E5.2) 04-2015
39
