FDL (E2) 03/2011
page 63/68
17.4 Equipment and Options
To operate the safety / paint drying oven, use only original BINDER accessories or accesso-
ries / components from third-party suppliers authorized by BINDER. The user is responsible
for any risk arising from using unauthorized accessories.
Regular equipment
Electronically controlled APT.line™ preheating chamber technology
In compliance with all safety requirements according to EN 1539: 2009 and GUV-R 500 Kap. 2.28 „Be-
treiben von Trocknern für Beschichtungsstoffe““ ("Dryers for coating materials") (for Germany)
Multifunction program controller RD3 with digital display
Adjustable ramp functions via program editor
Temperature safety controller class 2 acc. to DIN 12880:2007
Communication and printer interface RS 422
Fresh-air monitoring with visual and audible alarms and automatic heating shut-off
Replaceable fresh-air filter cartridge (fine-particle filter for particle sizes 1 µm to 10 µm, class F6/EU6 acc.
to EN 779:2002)
FKM door gasket (for max. temp. 200 °C /
392°F
)
2 chrome-plated racks
Rear exhaust duct, diameter 100 mm /
3.94 inch
Options / accessories
Access ports with various diameters, with silicone plug
Rack, chrome-plated or stainless steel
Perforated rack, stainless steel
Rack lockings (4 pieces)
Reinforced rack stainless steel, with 1 set rack lockings
Reinforced inner chamber with 2 reinforced racks
Door with window and touching protection
Lockable door
Silicone door gasket resistant to high temperatures > 200 °C /
392°F
. Attention: Above 250 °C /
482°F
the gasket will age faster
High temperature resistance for inflammable areas (electrical area according to protection type IP 54)
Fresh air replacement filter (class F6/EU6 acc. to EN 779:2002) for particles 1µm to 10µm), with alumi-
num frame
Measurement of air change rate acc. to ASTM D 5374:1993/2005
Additional measuring channel for digital specimen temperature display (with magnet or clip sensor) with
analog output 4-20 mA at DIN socket (DIN plug included)
Serial printer with interface, for numerical and graphical temperature registration
Factory calibration certificate, measurement in the center
Extension of factory calibration certificate (additional value)
Measuring protocol acc. to DIN 12880:2007
Qualification folder
Neutral cleaning agent (liquid concentrate)
Stable table on wheels with castors and locking brakes
Summary of Contents for 9010-0269
Page 6: ...FDL E2 03 2011 page 6 68...
Page 69: ......
