FDL (E2) 03/2011
page 13/68
Symbol on the type plate
Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on the
market in the EC after 13 August 2005 and to be disposed of in a
separate collection according to directive 2002/96/EC on waste elec-
trical and electronic equipment (WEEE).
The equipment is certified in the GOST R certification system of
GOSTSTANDARD Russia.
GS mark of conformity of the “Deutsche Gesetzliche Unfallversi-
cherung e.V. (DGUV), Fachausschuss Metall- und Oberflächenbe-
handlung, Prüf- und Zertifizierungsstelle im DGUV Test“ (German
Social Accident Insurance (DGUV), Expert Committee: Metal and
Surface Treatment, Testing and Certification Body in DGUV)
1.5
General safety instructions on installing and operating the safety / paint
drying oven FDL
With regard to operating the safety / paint drying oven FDL and to the installation location, please ob-
serve the guideline BGI/GUV-I 850-0 on safe working in laboratories (formerly BGR/GUV-R 120 or ZH
1/119 laboratory guidelines issued by the employers’ liability insurance association) (for Germany).
BINDER GmbH is only responsible for the safety features of the unit provided skilled electricians or quali-
fied personnel authorized by BINDER perform all maintenance and repair, and if components relating to
chamber safety are replaced in the event of failure with original spare parts.
To operate the unit, use only original BINDER accessories or accessories from third-party suppliers au-
thorized by BINDER. The user is responsible for any risk caused by using unauthorized accessories.
CAUTION
Danger of overheating.
Damage to the unit.
∅
Do NOT install the unit in unventilated recesses.
Ensure sufficient ventilation for dispersal of the heat.
Do not operate the safety / paint drying oven FDL in hazardous locations.
DANGER
Explosion hazard.
Danger of death.
∅
Do NOT operate the unit in potentially explosive areas.
∅
KEEP explosive dust or air-solvent mixtures AWAY from the unit.
Familiarize yourself with any potential health risks caused by the charging material, the contained mois-
ture constituent or by reaction products which may arise during the temperature process. Take adequate
measures to exclude such risks prior to putting the safety / paint drying oven into operation.
Summary of Contents for 9010-0269
Page 6: ...FDL E2 03 2011 page 6 68...
Page 69: ......
