3
Inserting a battery
1. Slide the battery cover open.
2. Insert the AAA batteries and verify that they are inserted correctly.
3. Side the battery cover closed.
.
Pairing with Bluetooth device
Before using your headset for the first time, you must pair it with a Bluetooth enabled device
prior to usage. The “Pairing” process creates a unique wireless link between two devices.
Once paired the communications between the paired devices does not need any further
authentication or authorization.
Please follow the instruction below to pair the headset with a Bluetooth enabled device:
1. Follow the operating instructions that came with your Bluetooth device to initiate the
pairing process.
2. Press and hold the “Power Switch” on the headset for 3 seconds until a single blue LED
illuminates to power on the headset.
3. After powering on the headset, it enters the pairing mode automatically with the “Pairing
LED indicator” blinking red and blue alternatively and waiting to be paired with another
Bluetooth device for 60 seconds.
4. Your Bluetooth device will indicate that it has found a headset named “CSR-bc3”, please
select it for pairing.
5. Once pairing is successful between the stereo headset and the Bluetooth device, the
stereo headset will exit the pairing mode and will be ready to use.
＊
Note: The pairing mode for the stereo headset is 60 seconds after powering on.
To enter the pairing mode again please reset the headset .
