MINI WASH 18
MINI WASH 18
4
1- In-built Program Mode
Setting Maximum Pan Angles
To select, use the “MODE/ESC” button and choose
“PA18”,PA36”,or” PA54”. “UP” and “Down” buttons cycle
between all available Pan Angles.Press the “ENTER” button to
confirm the chosen selection.
LED Display
Maximum Pan
PA18
18°
PA36
36°
PA54
54°
Setting Maximum Titl Angles
To select, use the “MODE/ESC” button and choose “t.9”,t.18”,or”
t.27”. “UP” and “Down” buttons cycle between all available Tilt
Angles.Press the “ENTER” button to confirm the chosen
selection
LED Display
Maximum Pan
t.9
9°
t.18
18°
t.27
27°
1- in-built Program Mode(continued)
As the unit can be mounted hung underneath trussing,or can sit
equally well on a flat surface,pan,tilt and LED display settings
can be reversed to provide correct coverage and ease of use.
Setting Reversed or Normal Pan
To select,use the “MODE/ESC” button and choose “Pan”(normal)
MINI WASH 18
MINI WASH 18
13
and for your own safety.
There are no user replacement parts inside the product. Do
not open the product for any reason.This will invalidate your
Manufacturer Warranty and may inpair the safety features
of the product.
Do not expose this poduct to moisure,rain or other fluids.
Do not use this prodduct near water or other fluids.
Do not use the product if you supect it has been damaged
in any way,including being dropped,is malfunctioning,or has
been exposed to liquids or moisture. The unit must be
repaired by an authorised service centre only. Mabufacturer
Warranty is void if unit is opened or adapted in any way.
Operator satety may be compromised if this product is not
operated and maintained in accordance with the details
contained in this Owner Handbook.
This appliance must be earthed,Do not remove the earth
connection in th eplug or any other location-it is essntial for
user safety.
Be aware that products are mains powered and may be
capable of producing high votages from its uouputs and has
mains votages inside the cabinet.
Product installation,Use& maintenance
Keep this Owner handbook safe for future reference.
Clean the product with a clean and dry,non-abrasive cloth.
Do not use solvents or liquids to clean the product.
To prevent overheating,do not obstruct any ventilation
opening,fan cover or vent. Do not install any source of heat
such as radiators,heaters,other heat producing items such
as cmplifiers,power units etc.
