Bill Hempel 42% Extra 260, User Manual

Page: 20 / 31

20
We built a simple tray out of light plywood to hold the ignition
unit and ignition regulator. The ignition unit and regulator were
secured with hook and loop material. Place foam rubber under
both the ignition unit and regulator.
Cut a slot on each side of the motor box for the spark plug wires to
exit. Place some plastic conduit over the spark plug wire to help
prevent chaffing. We mounted the ignition battery in the bottom of
the motor box. Place foam rubber under the battery, and secure it
with hook and loop material.