Bilanciai VENUS, User Manual

Page: 8 / 184

1.2 Foreword
✔
The aim of this manual is to provide the operator, through the use of
text and illustrations, with essential information regarding the
installation, safe operation and maintenance of the weighing system.
✔
This manual must be kept in a safe place where it is readily available
for consultation! Always observe the instructions contained in the
manual!
✔
Safe operation of the system is the responsibility of the operator, who
must be fully familiar with it.
✔
The user is responsible for ensuring that the installation conforms to
the applicable regulations.
✔
The equipment must only be installed by specialised personnel who
have read and understood this manual.
✔
The term "specialised personnel" means any personnel who, by
virture of the training they have received and their professional
experience, have been explicitly authorised by the "System safety
supervisor" to install, operate and service the system.
✔
Contact your nearest Service Centre if problems occur.
✔
Any attempt on the part of unauthorised personnel to dismantle or
modify the terminal is prohibited. Any such attempt shall invalidate the
warranty and relieve the manufacturer from all liability for any damage
or injury to persons or property.
✔
It is also forbidden to alter or remove the data plates and seals on the
terminal. Make sure that all plates and seals are present and legible,
if not contact the After-Sales Service.
✔
The manufacturer shall not be liable for any damages caused by
incorrect handling of the terminal.
✔
The information and illustrations contained in this manual were up to
date at the time of publication.
✔
The manufacturer is committed to a policy of continuous product
improvement and parts of the system may therefore be subject to
modification.
✔
All the technical information contained in this manual remains the
exclusive property of the manufacturer and may not be disclosed to
third parties.
✔
No part of this document may be reproduced or transmitted in any
Venus
1-8