Bilanciai DD1050, Operation, Maintenance And Installation Manual, Page: 18 / 112

18
DD1050
2 SAfETY INSTRUCTIONS
2.1 forbidden uses
The instrument you have purchased is a weighing system and has been designed and manufactured
as such.
The instrument is primarily intended for weighing goods.
• It is forbidden to use the terminal without taking the necessary precautions for safe use.
• Use of the terminal in places with potentially explosive atmospheres or in areas where there
is a risk of fire is strictly prohibited.
Any other use shall only be permitted if explicitly authorised by the Manufacturer.
2.2 Regulations
The operating conditions for the electronic terminal are subject to the regulations in force in the
country in which the terminal is used.
All use of the line in conditions which do not comply with these regulations is prohibited.
2.3 Instructions for use
• Strictly comply with the instructions in this manual during use.
• In the event of discrepancy between the information in this manual and the instrument
purchased, contact your Dealer or the Manufacturer's After-Sales Service for explanations.
• Always observe the indications given on the warning and danger plates on the terminal.
• Make sure that all the terminal’s coverings and protective casings are correctly in place and
that the connection cables are in a good condition and corrected properly.
• Make sure that the terminal is connected to an electrical outlet socket equipped with an efficient
earth connection. Make sure that the line complies with the applicable regulations. Make sure
that there is no difference in potential between the earth and neutral conductors.
• If the terminal is to be connected to other devices (e.g. a computer or other), these devices
must be disconnected from the electricity main before connection to the terminal.
• All maintenance work and/or repairs must be carried out by authorized personnel only.
• Always disconnect the terminal from the electricity main and wait a few minutes before
accessing the internal components.