Bilanciai DD1050, Operation, Maintenance And Installation Manual, Page: 10 / 112

10
DD1050
1.5 Technical characteristics of the terminal
Power supply
Direct 12 Vdc/5 A (Min 11 V - Max 15 V)
Via network adapter L+N+R
110 - 240 Vac (-15% … +10%)
1.8 A
50 - 60 Hz
60 W Max
Ground connection Equipotential type for weighbridges
Scales
Total 1/2
(or 1 analog, or 1 digital, or 2 analogs or 2 digitals)
Slave operating mode
Analog scale
Load cells that can be connected Up to twelve 350 Ohm analog cells per scale
Minimum impedance 29 Ohm per scale
Load cell power supply 10 Vdc
Internal resolution 200000 points @ 25 conv/s
Resolution in type-approved version Up to 6000 divisions or two 3000 ranges
Maximum input signal 35 mV
Sensitivity 0.6 µV/division
Full scale stability < 5 ppm/°C
Zero stability < 5 ppm/°C
Digital scale
Load cells that can be connected Up to one scale with 12 digital load cells or two
scales with 8 digital load cells
Minimum impedance 80 Ohm
Load cell power supply 10 to 15 Vdc
Internal resolution 200000 points @ 25 conv/s
Resolution in type-approved version Up to 6000 divisions or two 3000 ranges
Environmental specifications
Compensated temperature range From -10 to + 40 °C
Operating range From -10 to + 40 °C
Maximum humidity 85% @ 40 °C
IP protection degree IP 20, Front IP 65
User interface
Video 10.4” backlighted TFT display
Keyboard Touch screen