Bilanciai Cigiemme MERCURY PLUS, Instruction Manual

Page: 199 / 260

MERCURY PLUS
1-199
enabled, the printing options will be enabled/disabled whenever the
+ L keys are pressed together.
The following combinations are available: no print, weight control,
packing list, packing list + weight control. Note that, unlike weight
control, the packing list print enabling option is memorized for when the
terminal is powered again.
6.4.2 CTRL - Process example
If the process begins with pieces that weigh less than the nominal
weight, these pieces are rejected. If the averagr rises after this, the
previously rejected pieces are re-weighed in consideration of the fact
that if the piece in question weighs more than the "- limit" and,
meanwhile, the instantaneous average is more than the nominal weight,
it can be accepted.
6.4.3 CTRL - Lot closing
A weight control lot can be closed in the following ways:
✔
When 10000 pieces have been reached, if a lower processing limit
has not been set in the plu (in accordance with the current laws). In
this case, the machine automatically quits the process.. Operation
with weight control is disabled if the same plu is processed again
without having been previously closed.
✔
When a request is made to close down the lot being processed by
pressing the key ( CTRL LOT CLOSING ). In a similar way to the
previous case, the machine quits the process automatically and
allows the same plu to be processed in the normal mode again.
✔
When the actual plu is closed. The lot is not eliminated from the
system. This allows repeated prints to be made by means of the
relative archive. Note that the plu can be closed in one of the
following modes: via the interface (pending plu window), via the
network (DELETE_PRO_ARC command) or when a processing limit
is reached. If the "close all" function is selected from the pending plu
window (or via the network by sending the "DELETE_ARC=ALL
command), the weight control lots are closed (but not eliminated) at